The Simmons Wheel Manipulator (WLD-300) is designed to interface with the Simmons WMC-200/400 Wheel Machining Center. The manipulator is constructed with a sturdy steel base and vertical column that supports a saddle/jaw assembly. The base is bolted to the wheel shop floor, and the column supports the saddle assembly which contains the wheel clamping jaws.
The saddle and jaw assembly can turn a full 246 degrees. A hydraulic motor provides the power for turning.
The Wheel Manipulator uses a dedicated hydraulic unit mounted to the saddle.
|Machine Weight||8,000 lbs||3628 kg|
|Machine Height||124.5 in||3162.3 mm|
|Swing Radius of Saddle||72 in||1828.8 mm|
|Min. Pick-up Height from Stack||32.5 in||826 mm|
|Max. Load Height||64.5 in||1639 mm|
|Hydraulic Pump Motor||10 GP x 1800 RPM||7.5 kW|
|Weight||1920 lbs||873 kg|
|Overall Floor Space||39.5 in x 91.1 in||1003 mm x 2314 mm|
|Conveyor Speed||30 FPM||9144 mm / min|
|Centering Device Speed||36 in / 20 sec||914 mm / 20 sec|
|Conveyor Drive Motor||2 hp||1.5 kW|
|Centering Drive Motor||1 hp||0.75 kW|
|Weight||2,700 lbs||3628 kg|
|Overall Floor Space||62 in x 94.8 in||1575 mm x 2407 mm|
|Lift Range||36 in||914 mm|
|Lift Speed||36 in / 30 sec||914 mm / 30 sec|
|Tilt Speed||90 deg / 60 sec|
|Lift Motor||1 hp||0.75 kW|
|Tilt Motor||1 hp||0.75 kW|