BMP-070 Bearing Mount Press
The Simmons Bearing Mount Press (BMP-070) automatically aligns and presses bearing onto railway axles at the proper tonnage. An integrated measuring system can be included to compensate for various wheel diameters to maintain proper center location.
Mounting tonnage is controlled hydraulically by pressure control to assure bearings are not damaged by excessive force while mounting. Wheel sets roll into the press on customer shop rails and are captured on the press centerline. The bearings are placed on a mandrel, which is mechanically aligned with the bearing mounting tool for various bearing configurations. The bearings are then pressed into place and set at the manufacturer’s recommended tonnage. After the mounting operation is complete, the wheel set is escaped at the rear of the machine via the customer shop rail system. Tooling is supplied per customer product specification.
The press can be supplied for fully automatic or semi-automatic operation, depending on the customer’s production requirement. There is also an optional Bearing Press Recorder available, which automatically captures the mount force versus distance graph and store that data along with wheel set information entered by the operator.
Machine Specifications
Download our BMP-070 Bearing Mount Press product data sheet — for the full machine specification, please contact the Machine Sales team.
Cycle Time
1 minute (excluding bearing handling)
Bearing Size
All AAR Bearing Sizes
Ram Press Stroke
17 in. | 432 mm
Maximum Operating Force
70 tons | 63.5 metric tons
Electrical Power
32 kW
Hydraulic Reservoir
60 US gallons | 227 liters
Maximum Wheel Diameter
42 in | 1067 mm
Minimum Wheel Diameter
28 in | 711 mm
Maximum Axle Length
102 in | 2591 mm
We're here to help
The Simmons Customer Service Center (CSC) is here to support you and your machine. As the original equipment manufacturer (OEM), we are ideally suited to keep your machine productive and operating safely.